| Customization: | Available |
|---|---|
| After-sales Service: | 24 Hours Online |
| Warranty: | 12 Months |
Suppliers with verified business licenses
Audited Supplier Audited by an independent third-party inspection agency
| Residual chlorine meter | |
| Display | 7 inch touch screen |
| Protective box size | Dimensions: 400mm×300mm×200mm Window size: 155mm×87mm |
| Measuring range | Residual chlorine: (0~5) mg/L Temperature: (0.1~40.0)ºC |
| Transmit output | (4~20)mA (optional) |
| Communication | MODBUS RS485 |
| Load Resistance | ≤750Ω |
| Environment humidity | ≤95% no condensate |
| Power supply | 220VAC |
| Ingress protection | IP43 |
| Residual chlorine electrode | |
| Measurement content | HCLO,CLO2 |
| Measuring system | Microelectronics MEMS technology, special membrane structure |
| Measuring range | (0~5)mg/L |
| Accuracy | When ≤0.1mg/L, the absolute error is ±0.01mg/L; When ≥0.1mg/L, ±5% of the measured value or ±0.02mg/L
(whichever is greater)
|
| Resolution | 0.01 |
| Polarization time | When using for the first time, first pass water for 2 hours in chlorinated water, and then power on for half an hour. |
| Response time | Less than 30s after polarization is completed |
| Minimum conductivity | ≥100us/cm, can not be used for ultrapure water |
| Operating temperature | (0~40)ºC (non-condensing) |
| Temperature compensation | Pt1000 with built-in integrated automatic compensation |
| Max pressure | 4bar |
| Recommended flow rate | ≥0.03m/s in flow cell |
| pH range | (5~9) pH, below 5 will damage the membrane head |
| Maximum chlorine concentration | ≥5ppm |
| Power supply | Standard 24V DC±2V; optional 12V DC±2V |
| Power consumption | 1.56W |
| Digital communication | MODBUS RS485 |
| Cable length | Standard 3 meters, others can be customized |
| Probe weight | 210g |
| Thread size | NPT 3/4 |
| Connection method | 5-pin waterproof aviation plug |
| Moisture-proof material | PVC and Viton® O-ring seals |
Overseas Service Center Address:
Singapore/ Philippines/ Malaysia/ Kroea/ Indonesia/ Germany/ India
FAQ:
Q: How long will you give me the reply?
A: we will contact you in 3 hours as soon as we can.
Q:Could I visit your factory?
A: Sincerely invite you to visit our factory,Our factory and office are all in Hangzhou,Zhejiang.
Q: Do you provide samples ?
A: Yes,we have materials in stock to help you to get the samples as soon as we can.
Q: How about the quality of the managements ?
A: We have a complete quality control system , all of our products will be fully pre-inspection by QC departments before shipping to you . We have the certification of ISO,CE we could send the certification test of our company to you.
Q: What is your terms of payment ?
A: We could accept T/T, Paypal, WU ,Credit Assurance
Q: What is the warranty for your product ?
A: Warranty: 2 years, Lifetime maintenance.
Q: How soon can you arrange the production?
A: Once getting your product confirmation and receiving your payment, we will arrange the production immediately. For some products we have it in stock.
Q: Could you provide me the shortest lead time?
A: For somre standard products we have it in stock . Pls tell me your detailed requirements, we will send to you as early as we can.
){kind=link}